2-Sided Original. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

2-Sided Original

2-Sided Original

You can set the machine to automatically turn over 2-sided originals that are placed in the feeder, and scan each side separately.

The default setting is <Off>.

–

–

–

The 2-sided original mode cannot be used when sending a fax document in the direct sending or manual sending mode.

When you are scanning originals with a horizontal (landscape) orientation, such as LTRR, make sure to place them horizontally into the feeder. If these originals are placed vertically, the back sides of these originals are scanned upside down.

For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.

1 Press (Main Menu).

2 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Send/Fax>, then press [OK].

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <2-Sided Orig. Orientation Set.>, then press [OK].

3 Specify a destination.

If <Book Type Original> or <Calendar Type

Original> has been selected, <2-Sided Originals

Settings> is displayed.

5-56

For details about how to specify destinations, see

“Specifying Destinations,” on p. 5-30.

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the type of original, then press [OK].

–

–

–

<Off>: 1-sided originals are scanned.

<Book Type Original>: The front and back sides of the original have the same topbottom orientation.

<Calendar Type Original>: The front and back sides of the original have opposite topbottom orientations.

2-Sided Original

5-57