Redialing Automatically When the Line Is Busy (Auto Redial). Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

5-80

Redialing Automatically When the Line Is Busy (Auto Redial)

Redialing Automatically When the Line Is

Busy (Auto Redial)

Auto Redial enables the machine to automatically redial the recipient’s fax number if the recipient cannot be reached due to a busy line, or if a sending error occurs.

Auto Redial can be turned on or off. If you set Auto Redial to on, you can set how many times the machine redials, the redial interval, and whether the document should be resent due to an error.

The default settings are as follows:

–

–

–

–

<Auto-redial>: On

<Redial Time>: 2 Times

<Redial Interval>: 2 Minutes

<TX Error Redial>: All Pages

1 Press (Main Menu).

2 Press the right Any key to select

<Additional Func.>.

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Communications Settings>, then press

[OK].

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Fax Settings>, then press [OK].

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<TX Settings>, then press [OK].

Redialing Automatically When the Line Is Busy (Auto Redial)

8 Press the right Any key to select

<Option>.

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Auto-redial>, then press [OK].

9 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Redial Times>, then press [OK].

7 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Off> or <On>, then press [OK].

10 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to set the number of redial times, then press

[OK].

–

–

<Off>: Does not redial automatically when a transmission fails. If you select <Off> and press [OK], go to step 15.

<On>: Redials automatically when a transmission fails. If you select <On> and press [OK], press [OK] again, then go to the next step.

You can also use – (numeric keys) to set the number of redial times.

5-81

5-82

Redialing Automatically When the Line Is Busy (Auto Redial)

11 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Redial Interval>, then press [OK].

14 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Off>, <All Pages>, or <Error and 1st

Page>, then press [OK].

12 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to set the redial interval, then press [OK].

You can also use – (numeric keys) to set the redial interval.

13 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<TX Error Redial>, then press [OK].

–

–

–

<Off>: Redialing does not take place if a sending error occurs.

<All Pages>: Auto Redial takes place if a sending error occurs. All pages of the document are resent.

<Error and 1st Page>: Auto Redial takes place if a sending error occurs. The first page of the document, the error page, and all subsequent pages are resent.

15 Press (Main Menu) to return to the

Main Menu screen.