Adjusting Density. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Adjusting Density

Adjusting Density

You can manually adjust the copy exposure to the most appropriate level for the original.

The copy tone becomes lighter as the indicator moves to the left, and darker as it moves to the right.

The default setting is <0>.

1 Set originals.

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Copy>, then press [OK].

For details, see “Placing Originals,” on p. 2-4.

2 Press (Main Menu).

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Density/Background Rem. Set.>, then press [OK].

4-19

Adjusting Density

5 Use [ ▼ ], [ ▲ ], [ ◀ ], [ ▶ ], or (Scroll

Wheel) to adjust the copy density, then press [OK].

–

–

To make dark originals lighter, move the density scale to the left.

To make light originals darker, move the density scale to the right.

6 Use – (numeric keys) to enter the desired copy quantity (1 to 99).

7 Press (Start).

4-20

If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page.

8 Press (Main Menu) to return to the

Main Menu screen.

Adjusting Density

Adjusting Base Color

This mode enables you to adjust or remove the base color of the originals.

The default setting is <Off>.

1 Set originals.

5 Press the right Any key to select

<Background>.

For details, see “Placing Originals,” on p. 2-4.

2 Press (Main Menu).

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Copy>, then press [OK].

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the background setting, then press [OK].

■ If you select <Background Removal>:

① Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Background Removal>, then press [OK].

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Density/Background Rem. Set.>, then press [OK].

② Press [OK], then skip to step 7.

4-21

4-22

Adjusting Density

■ If you select <Background Fine Adjust.>:

① Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Background Fine Adjust.>, then press [OK].

7 Use – (numeric keys) to enter the desired copy quantity (1 to 99).

② Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the desired color, then press [OK].

8 Press (Start).

③ Use [ ▼ ], [ ▲ ], [ ◀ ], [ ▶ ] or (Scroll Wheel) to adjust the strength of the color, then press [OK].

If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page.

9 Press (Main Menu) to return to the

Main Menu screen.

④ Press the right Any key to select <Set>, then press [OK].