Multiple Originals onto One Sheet (N on 1). Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Multiple Originals onto One Sheet (N on 1)

Multiple Originals onto One Sheet (N on 1)

This mode enables you to reduce multiple originals to fit on one sheet of paper (one-sided/ two-sided). You can make well-organized copies by copying multiple originals onto one sheet. This mode enables you to cut print costs by saving copy paper, and it is also useful for saving space.

The default setting is <Off>.

–

–

The N on 1 mode cannot be used with the ID Card Copy, Original Frame Erase mode, Book Frame Erase, or Binding Erase

mode. For details about the erase mode, see “Erasing Shadows/Lines,” on p. 4-44.

The reduction ratio is automatically set so that the originals fit onto the selected paper size.

4-37

4-38

Multiple Originals onto One Sheet (N on 1)

1 Set originals.

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Copy Multiple Pages onto 1

Page>, then press [OK].

For details, see “Placing Originals,” on p. 2-4.

When placing horizontal (landscape) originals into the feeder in the 2 on 1 mode, place the originals bottom side up.

2 Press (Main Menu).

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Copy>, then press [OK].

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the combination type, then press [OK].

– <2 On 1>: This setting reduces two 1-sided originals or one 2-sided original to fit onto one side or both sides of the copy sheet.

– <4 On 1>: This setting reduces four 1-sided or two 2-sided originals to fit onto one side or both sides of the copy sheet.

If you select <4 On 1>, you can specify the copy layout. Press the right Any key to select

<Option>, then select the desired layout type.

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the original size, then press [OK].

Multiple Originals onto One Sheet (N on 1)

8 Use – (numeric keys) to enter the desired copy quantity (1 to 99).

To switch to the A/B Sizes, press the left Any key to select <A/B Sizes>.

7 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the paper source, then press [OK].

9 Press (Start).

If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page. After scanning all originals, press the right Any key to select <Done>.

10 Press (Main Menu) to return to the

Main Menu screen.

If you select <Stack Bypass Tray>, specify the paper size and type.

–

–

If you want to make two-sided copies of N on

1, see “2-Sided Copying,” on p. 4-23.

If you want to make N on 1 copies from twosided originals, select <2-Sided to 1-Sided> in

the two-sided settings. For details, see “2-Sided

Copying,” on p. 4-23.

4-39