Selecting Image Quality. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Selecting Image Quality

Selecting Image Quality

You can manually select the original type according to the type of image that you are scanning.

The default setting is <Text/Photo>.

–

–

–

–

Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled.

If you scan an original containing halftones, such as a printed image, using the <Photo> mode, the moiré effect (a shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using the sharpness mode. (See

“Adjusting Sharpness,” on p. 5-92.)

If the original is a transparency, select the original type and adjust the exposure to the most appropriate level for the original.

For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.

1 Press (Main Menu).

2 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Send/Fax>, then press [OK].

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Original Image Quality

Settings>, then press [OK].

3 Specify a destination.

5-54

For details about how to specify destinations, see

“Specifying Destinations,” on p. 5-30.

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the image quality, then press [OK].

–

–

–

<Text/Photo>: This mode is best suited for scanning originals containing both text and photos such as magazines or catalogs.

<Text>: This mode is best suited for scanning text originals. Blueprints or pencil drawn originals can also be scanned clearly.

<Photo>: This mode is best suited for scanning photos printed on photographic paper or photo originals containing halftones

(e.g. printed photos).

Selecting Image Quality

5-55