Setting the Incoming Ring Tone. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Setting the Incoming Ring Tone

Setting the Incoming Ring Tone

This function enables you to activate the ring alert of the external telephone when the machine receives a fax or telephone call in the Auto RX or Fax/Tel Auto Switch mode.

The default settings are as follows:

–

–

<Incoming Ring>: On

<Ring Times>: 2 Times

Incoming calls or outgoing calls may not work properly, depending on the type of the external telephone connected to the machine.

1 Press (Main Menu).

2 Press the right Any key to select

<Additional Func.>.

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Fax Settings>, then press [OK].

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Communications Settings>, then press

[OK].

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<RX Settings>, then press [OK].

5-111

Setting the Incoming Ring Tone

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Incoming Ring>, then press [OK].

7 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Off> or <On>.

–

–

<Off>: Incoming tone does not ring. If you select <Off>, press [OK], then go to step 9.

<On>: Incoming tone rings. If you select

<On>, press [OK], then go to the next step.

8 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to set the number of ring times, then press [OK].

5-112

You can also use – (numeric keys) to set the number of ring times.

9 Press (Main Menu) to return to the

Main Menu screen.