Specifying What to Display on the Screen for a Send Operation. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

5-94

Specifying What to Display on the Screen for a Send Operation

Specifying What to Display on the Screen for a Send Operation

This mode enables you to specify what screen is displayed for a send operation. When you select <Send/Fax> on the Main Menu screen and press [OK], the screen specified here is displayed for a send operation.

The default setting is <Default Screen>.

1 Press (Main Menu).

2 Press the right Any key to select

<Additional Func.>.

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Common Settings>, then press [OK].

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Communications Settings>, then press

[OK].

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<TX Settings>, then press [OK].

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Default Screen for Send>, then press

[OK].

Specifying What to Display on the Screen for a Send Operation

7 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the initial screen, then press [OK].

–

–

–

<Favorites>: The Set Favorites screen is displayed on the initial Send screen.

<One-touch>: The One-touch Selection/Clear screen is displayed on the initial Send screen.

<Default Screen>: The Select Send Type screen is displayed on the initial Send screen.

8 Press (Main Menu) to return to the

Main Menu screen.

5-95