Selecting Image Quality. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Selecting Image Quality

Selecting Image Quality

You can adjust the image quality of copies according to the types of originals. A correct selection is necessary for the optimal reproduction of the colors of the original.

The default setting is <Text/Photo/Map>.

–

–

Combinations of these four modes (Text/Photo/Map, Printed Image, Photo, and Text) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled.

If the original is a transparency, select the original type, then adjust the exposure to the most appropriate level for the original.

1 Set originals.

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Copy>, then press [OK].

For details, see “Placing Originals,” on p. 2-4.

2 Press (Main Menu).

4-35

4-36

Selecting Image Quality

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Original Image Quality

Settings>, then press [OK].

6 Use – (numeric keys) to enter the desired copy quantity (1 to 99).

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the image quality, then press [OK].

7 Press (Start).

– <Text/Photo/Map>: For originals that contain text, photos, and maps

If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page.

8 Press (Main Menu) to return to the

Main Menu screen.

If you select <Text/Photo/Map>, you can set priority on <Text> or <Photo>. Press the right Any key to select <Priority Level>, then use [ ▼ ], [ ▲ ],

[ ◀ ], [ ▶ ] or (Scroll Wheel) to adjust the priority revel.

–

–

–

<Printed Image>: For originals that contain dot photos such as magazines

<Photo>: For photo paper originals such as photos

<Text>: For originals that contain only text