Direct Sending. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

Direct Sending

Direct Sending

The machine sends each page of the document to the destination as it is scanned.

The default setting is <Off>.

–

–

–

–

–

If you do not select direct sending mode, memory sending mode is used.

With direct sending mode, you can send a document of two or more pages only when using the feeder. You can only send one page at a time when you place your original on the platen glass.

You can specify only one destination at a time for direct sending mode.

Memory sending is automatically set when using delayed sending or when multiple destinations are specified.

If an error occurs or you cancel transmission in the direct sending mode, you can check how many pages have been sent to the destination by printing the Activity Report, the Fax Activity Report, or on the <Log> for fax on the System Monitor screen.

1 Place your originals.

4 Specify a destination.

2 Press (Main Menu).

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Send/Fax>, then press [OK].

For details about how to specify destinations, see

“Specifying Destinations,” on p. 5-30.

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to display <Direct Send Settings>, then press [OK].

5-61

5-62

Direct Sending

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Off> or <On>, then press [OK].

9 Press (Start).

–

–

<Off>: Send after all pages are scanned.

<On>: Send each page as it is scanned.

7 Press (Start).

–

–

Scanning starts.

To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

You can only send one page at a time when you place your original on the platen glass.

–

–

Scanning starts if the original is placed in the feeder, and the scanned data is sent to the specified destination when scanning is complete.

To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

8 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select the original size, then press [OK].