If a Message Such as <Paper diff. from set size/type.> is displayed. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

If a Message Such as <Paper diff. from set size/type.> is displayed

If a Message Such as <Paper diff. from set size/type.> is displayed

If all of the following do not match, a message such as <Paper diff. from set size/type.> is displayed:

–

–

–

The paper size specified on the printer driver (Only when printing from a computer)

The paper size specified in the <Paper Settings> menu on the machine

The size of the paper loaded in the paper drawer or stack bypass tray

If such a message is displayed and you are unable to make a copy or print job, change the paper size in the items described above so that they all match.

The following chart is a list of the messages. See “Error Messages,” on p. 12- 24 for details

concerning the messages and remedies.

●

Messages dsplayed when the paper szes do not match

Message

Copy

Load LTR to Drawer 1.

(Depending on the paper supply and settings, the message displayed may vary.)

Paper diff. from set size/type.

Remove the jammed paper from inside the front cover.

Cause

The following did not match:

– The paper size specified on the machine

– The size of the paper loaded in the paper drawer

The following did not match:

– The paper size specified on the machine

– The size of the paper loaded in the paper drawer

Print

Load LTR to Drawer 1.

(Depending on the paper supply and settings, the message displayed may vary.)

Paper diff. from set size/type.

Load paper

Remove the jammed paper from inside the front cover.

–

–

The following did not match:

The paper size specified on the machine

The size of the paper loaded in the paper drawer

–

–

The following did not match:

–

The paper size specified on the printer driver

The paper size specified on the machine

The size of the paper loaded in the paper drawer

The following did not match when printing:

– The paper size specified on the printer driver

– The paper size specified on the machine

A paper jam occurred because the size of the paper loaded in the paper drawer was different from that of the paper specified on the machine and printer driver.

–

–

–

Load the correct size paper if the size of the paper loaded in the paper drawer does not match. See “Reloading the Paper,” on p. 12-42 for

instructions.

Change paper size if the paper size specified on the machine does not match. See “Changing the Paper Size Setting,” on p. 12-42 for

instructions.

For print jobs, you need to specify the paper size from your computer.“

12-41

12-42

If a Message Such as <Paper diff. from set size/type.> is displayed

Reloading the Paper

1 Load the correct size paper, then press

[OK] to resume the job.

The machine re-starts printing.

See “Loading Paper,” on p. 2-10 for instructions

on how to load paper.

Changing the Paper Size Setting

●

For the Stack Bypass Tray

If you set the standard settings for stack bypass tray, follow the procedures below to change paper size.

1 Press (Main Menu).

2 Press the right Any key to select

<Additional Func.>.

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Stack Bypass Paper (Std.)>, then press

[OK].

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Paper Settings>, then press [OK].

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<On>, then press the right Any key to select <Option>.

If you do not want to set the stack bypass standard settings, select <Off>, then press [OK], and press (Main Menu) to return to the

Main Menu screen.

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select paper size, then press [OK].

If a Message Such as <Paper diff. from set size/type.> is displayed

7 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select paper type, then press [OK].

You can select from the following paper sizes:

<LTR>, <LGL>, <STMT>, <EXEC>, <FLSC>,

<OFI>, <B-OFI>, <M-OFI>, <G-LTR>, <G-LGL>,

<Custom Size>, <COM10>, <Monarch>, <DL>,

<ISO-C5>, <ISO-B5>

If you use A/B size paper, press the right Any key to select <A/B Sizes> and select the paper size you want to use.

You can select from the following paper types:

<Plain 1>, <Plain 2>, <Recycled Paper>,

<Color>, <Bond>, <Heavy 1>, <Heavy 2>,

<Transparencies>, <Labels>, <Envelope>

The selectable paper types vary depending on the paper size you have specified. The unavailable paper types are grayed out on the display.

8 Press (Main Menu) to return to the

Main Menu screen.

●

For the Paper Drawer

Follow this procedure to change the paper size setting.

1 Press (Main Menu).

2 Press the right Any key to select

<Additional Func.>.

3 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Paper Settings>, then press [OK].

12-43

If a Message Such as <Paper diff. from set size/type.> is displayed

4 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select

<Drawer 1> or <Drawer 2>*, then press

[OK].

7 Press (Main Menu) to return to the

Main Menu screen.

* Only when the optional Paper Drawer (Paper

Drawer 2) is attached.

5 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select paper size, then press [OK].

You can select from the following paper sizes:

<LTR>, <LGL>, <EXEC>, <FLSC>, <OFI>,

<B-OFI>, <M-OFI>

If you use A/B size paper, press the right Any key to select <A/B Sizes> and perform the step above.

6 Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select paper type, then press [OK].

12-44

You can select from the following paper types:

<Plain 1>, <Plain 2>, <Recycled Paper>,

<Color>, <Bond>, <Heavy 1>