advertisement
Installing Options
F
Install the IEEE 1394 interface board, IEEE 1284 interface board, IEEE
802.11b interface unit or Bluetooth interface unit.
Install the IEEE 1394 interface board, IEEE 1284 interface board, IEEE
802.11b interface unit or Bluetooth interface unit on the controller board.
The IEEE 1394 interface board and standard Ethernet interface cannot be used at the same time.
Up to two of the following can be installed:
• IEEE 1394 Interface Board Type B
• IEEE 1284 Interface Board Type A
• IEEE 802.11b Interface Unit Type H
• Bluetooth Interface Unit Type 3245
G
Install the network data protection unit (Network Data Protection Unit
Type C).
Insert the network data protection unit into the SD card slot on the controller board.
Installing Options
Install options in the positions shown in the illustration.
❖ Exterior
1.
AD440 (Duplex Unit)
Install this behind the front cover. Makes duplex prints.
See p.52 “Attaching AD440 (Duplex Unit)” .
2.
Paper Feed Unit Type 3000
Loads up to 530 sheets of paper.
45
Installing Options
Up to two paper feed units, can be installed on the printer. Installed tray units are identified as “Tray 2” and “Tray 3”.
See p.47 “Attaching Paper Feed Unit Type 3000” .
❖ Interior
1.
Printer Hard Disk Type 3000
See p.60 “Attaching Printer Hard Disk Type 3000” .
2.
Memory Unit Type D 128MB/Memory Unit Type E 256MB (SDRAM module)
Install 128 MB or 256 MB SDRAM module into the controller board slot.
See p.55 “Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB
(SDRAM Module)” .
3.
User Account Enhance Unit Type E
See p.66 “Attaching User Account Enhance Unit Type E” .
4.
Network Data Protection Unit Type C
See p.83 “Attaching Network Data Protection Unit Type C” .
5.
IEEE 1394 Interface Board Type B / IEEE 802.11b Interface Unit Type H /
Bluetooth Interface Unit Type 3245 / IEEE 1284 Interface Board Type A
See p.70 “Attaching IEEE 1394 Interface Board Type B” .
See p.73 “Attaching IEEE 802.11b Interface Unit Type H” .
See p.77 “Attaching Bluetooth Interface Unit Type 3245” .
See p.81 “Attaching IEEE 1284 Interface Board Type A” .
❒ You can install only one of the following types of extension board: IEEE 1394
Interface Board Type B ; IEEE 802.11b Interface Unit Type H ; Bluetooth Interface Unit Type 3245 ; IEEE 1284 Interface Board Type A.
❒ Some printer models come with the expansion duplex unit contained as default.
For the specifications of each option, see Maintenance Guide.
46
advertisement
Related manuals
advertisement