advertisement
Preparing for Printing
Installation is complete. If installation is successful, the icon of the printer connected to the “USB001” port is added to the [Printers] window.
❒ The number after “USB” varies depending on the number of printers connected.
❒ It is not necessary to reinstall USB Printing Support when connecting a different printer via USB interface when USB Printing Support is installed.
❒ After installing USB Printing Support, if the printer driver is not installed, follow the plug-and-play instructions of the printer.
❒ Install the printer driver from the CD-ROM provided with the printer.
Windows 2000 - USB
❒ Installing a printer driver requires Administrators permission. Log on using an account that has Administrators permission.
If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB” port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the CD-ROM provided.
A
Check that the power of the printer is off.
B
Connect the printer and computer using the USB cable.
C
Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
D
Click [Next] in the [Found New Hardware Wizard] dialog box.
E
Select the [Search for a suitable driver for my device (recommended)] check box, and then click [Next].
F
Select the [Specify location] check box, and then click [Next].
G
Insert the CD-ROM into the CD-ROM drive.
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the left {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.
H
Specify the location where the source files of the printer driver is stored.
54
advertisement
Related manuals
advertisement