Changing the Network Interface Board Configuration. Ricoh CLP22, LP222cn

Add to My manuals
536 Pages

advertisement

Changing the Network Interface Board Configuration. Ricoh CLP22, LP222cn | Manualzz

Monitoring and Configuring the Printer

❒ If you are required to restart the computer after installing SmartDeviceMonitor for Admin, restart the computer and continue the configuration.

❒ SmartDeviceMonitor for Client supports following languages: Czech, Danish, German, English, Spanish, French, Italian, Hungarian, Dutch, Norwegian, Polish, Portuguese , Finnish, Swedish, Chinese Simple and Chinese

Traditional.

Changing the Network Interface Board Configuration

Follow the procedure below to change the network interface board configuration using SmartDeviceMonitor for Admin.

A

Start SmartDeviceMonitor for Admin.

B

On the [Group] menu, point to [Search Device], and then click [TCP/IP],

[IPX/SPX] or [TCP/IP(SNMPv3)]. A list of printers using the selected protocol appears.

❒ Select the protocol of the printer whose configuration you want to change.

C

In the list, select a printer whose configuration you want to change.

D

On the [Tools] menu, click [NIB Setup Tool].

A Web browser opens and the dialog box for entering the user name and password for the Web Image Monitor administrator appears.

Enter your user name and password. Contact your network administrator for information about the settings.

NIB Setup Tool starts when the network interface board is default. Follow the instruction on the screen.

E

Enter required setting items.

Configure settings using Web Image Monitor. For details, see p.161 “Using

Web Image Monitor” .

F

Quit Web Image Monitor.

G

Quit SmartDeviceMonitor for Admin.

Locking the Menus on the Printer's Control Panel

Follow the procedure below to lock the menus on the printer's control panel.

A

Start SmartDeviceMonitor for Admin.

169

advertisement

Related manuals

advertisement

Table of contents