Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003). Ricoh CLP22, LP222cn

Preparing for Printing

F

Click [Local printer], and then click [Next >].

G

Click [Add Port...].

H

Click [LPR Port], and then click [New Port...].

I

Enter the printer's IP address in the [Name or address of server providing lpd] box.

J

Enter “lp” in the [Name of printer or print queue on that server] box, and then click [OK].

K

Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

L

Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

M

Click [Next >].

N

Specify whether or not to print a test page, and then click [Next >].

O

Click [Finish].

The printer driver installation starts.

❒ A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.

Installing the PostScript 3 Printer Driver (Windows XP, Windows

Server 2003)

❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.

A

Quit all applications currently running.

B

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.

C

Select an interface language, and then click [OK].

The default interface language is English.

39