advertisement
Making Printer Settings Using the Control Panel
PCL Menu
You can set conditions when using PCL for printing.
Changing the PCL menu
Follow the procedure below to change the setting for Orientation.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [PCL Menu], and then press the {# En-
ter} key.
C
Press the {U} or {T} key to display [Orientation] screen, and then press
the {# Enter} key.
D
Press the {U} or {T} key to select the orientation, and then press the {#
Enter} key.
Wait for two seconds. The [PCL Menu] screen appears.
E
Press the {Online} key.
The initial screen appears.
PCL menu parameters
This section explains about parameters that can be set on the PCL menu.
❖ Orientation
You can select the page orientation.
• Portrait
• Landscape
152
Making Printer Settings Using the Control Panel
❒ Default: Portrait
❖ Form Lines
You can specify the number of lines per page between 5 and 128.
❒ Default:
• Metric version: 60
• Inch version: 64
❖ Font Source
You can set the location of the default font.
• Resident
• RAM
• HDD
• SD
❒ Default: Resident
❒ When you select [RAM], you can select only fonts downloaded to the printer
RAM.
❒ When you select [HDD], you can select only fonts downloaded to the optional hard disk.
❖ Font Number
You can specify the ID of the default font you want to use.
• 0 to 50 (Internal)
• 1 to 50 (Download)
❖ Point Size
You can specify the point size you want to use for the default font between 4 and 999.75 in 0.25 increments.
❒ Default: 12.00 points
❒ This setting is effective only for a variable-space font.
❖ Font Pitch
You can specify the number of characters per inch you want to use for the default font between 0.44 and 99.99 in 0.01 increments.
❒ Default: 10.00 pitch
❒ This setting is effective only for fixed-space fonts.
153
Making Printer Settings Using the Control Panel
❖ Symbol Set
You can specify the character set for the default font. Available sets are as follows:
Roman-8, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852, PC8-
TK, Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US, MS Publ,
Math-8, PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO
17, ISO 21, ISO 60, ISO 69, Win 3.0
❒ Default: PC-8
❖ Courier Font
You can select a courier-type font.
• Regular
• Dark
❒ Default: Regular
❖ Ext. A4 Width
You can extend the width of the printable area of A4 sheets reducing side margin width.
• Off
• On
❒ Default: Off
❖ Append CR to LF
You can specify whether or not to append a CR code to each LF code to print text data clearly.
• Off
• On
❒ Default: Off
❖ Resolution
You can specify the print resolution in dots per inch.
• 300 dpi
• 600 dpi
❒ Default: 600 dpi
154
advertisement
Related manuals
advertisement