advertisement
Installing the Printer Driver
Quick Install
Windows 95/98/Me, Windows 2000/XP, Windows Server 2003, and Windows
NT 4.0 users can easily install this software using the CD-ROM provided.
Using Quick Install, the PCL printer driver and/or RPCS printer driver and Smart-
DeviceMonitor for Client is installed under network environment, and TCP/IP port will be set.
❒ To install printer driver under Windows 2000/XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has Manage
Printers permission. Log on as an Administrator.
❒ The Quick Install is not available when using this printer under USB connection. If you connect using USB, see Software Guide.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [Quick Install].
The software license agreement appears in the [License Agreement] dialog box.
G1398502_1.00
Copyright © 2005
105
Installing the Printer Driver
E
After reading the agreement, click [I accept the agreement.], and then click
[Next >].
F
Select the printer model you want to use in the [Select Printer] dialog box.
❒ For network connection via TCP/IP, select the printer whose IP address is displayed in [Connect To].
❒ For parallel connection, select the printer whose printer port is displayed in
[Connect To].
G
Click [Install].
The printer driver installation starts.
H
Click [Finish]
A message about restarting the computer may appear. Restart the computer to complete installation.
I
Click [Exit] in the first dialog box of the installer, and then take out the
CD-ROM.
❒ To stop installation of the selected software, click [Cancel] before installation is complete. Restart the computer, and then reinstall the other software or printer drivers.
❒ Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
❒ Select a printer to whose IP address is displayed in [Connect To] to install
SmartDeviceMonitor for Client when using TCP/IP.
Quick Install is not available unless bidirectional communication between the printer and computer is enabled via parallel connection. See “Install
SmartDeviceMonitor for Client from the CD-ROM provided.”, Software
Guide, for details about bidirectional communication between printer and computer.
106
advertisement
Related manuals
advertisement