advertisement
Monitoring and Configuring the Printer
Messages
Replace Develop. Unit (Color)
Replace Develop. Unit (Cyan)
Replace Develop. Unit (Magenta)
Replace Develop. Unit (Yellow)
Replace Fusing Unit
Replace Maintenance Kit
Replace PCU
Replace Transfer Belt
SD Card Authentication failed
Setting Remotely
Skipped due to Error
Storage Complete
Storage Failed
Supplies Order Call failed
Suspend / Resume Key Error
Transmission Aborted
Transmission Complete
Transmission Failed
Tray Error: Chaptering
Tray Error: Duplex Printing
Unit Left Open: ADF
Warming Up...
Description
It is time to replace the development unit
(color).
It is time to replace the development unit (cyan).
It is time to replace the development unit (magenta).
It is exchange time of the development unit
(yellow).
It is time to replace the fusing unit.
It is time to replace the maintenance kit.
It is time to replace the photoconductor unit.
It is time to replace the transfer belt.
SD card authentication failed.
The RDS setting is being processed.
Skipped the error.
The storage is complete.
The storage has failed.
The supply order call has failed.
Finisher stop button was pressed.
The transmission was interrupted.
The transmission completion was completed.
The transmission has failed.
The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing.
Selected paper tray cannot be used for duplex printing.
Document feeder is opened.
The machine is warming up.
❒ For details about UNIX commands, see UNIX Supplement.
❒ Check the error contents that may be printed in the configuration page. For details about printing a configuration page, see p.128 “List/Test Print Menu” .
Printer configuration
You can check the printer configuration using telnet.
216
Monitoring and Configuring the Printer
This section explains the checking procedure for input/output tray and printer language.
• UNIX: Use the “info” command and “rsh”, “rcp”, and “ftp” parameters.
• mshell: Use the “info” command.
❖ Input Tray
Item
No.
Name
PaperSize status
Description
ID number of the paper tray
Name of the paper tray
Size of paper loaded in the paper tray
Current status of the paper tray
• Normal:Normal
• NoInputTray: No tray
• PaperEnd:No paper
❖ Output Tray
Item
No.
Name status
Description
ID number of the output tray
Name of the output tray
Current status of the output tray
• Normal:Normal
• PaperExist:Paper exist
• OverFlow:Paper is full
• Error:Other errors
❖ Emulation
Item
No.
Name
Version
Description
ID number of the printer language used by the printer
Name of the printer language used in the printer
Version of the printer language
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell “info” commands, see p.190 “info” .
217
advertisement
Related manuals
advertisement