Quick Install. Ricoh CLP22, LP222cn

Preparing for Printing

Quick Install

Windows 95/98/Me/2000/XP, Windows Server 2003, and Windows NT 4.0 users can easily install this software using the CD-ROM provided.

Using Quick Install, the PCL printer driver and/or RPCS printer driver and Smart-

DeviceMonitor for Client is installed under network environment, and TCP/IP port will be set.

❒ To install printer driver under Windows 2000/XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has Manage

Printers permission. Log on as an Administrator.

❒ The Quick Install is not available when using this printer under USB connection. If you connect using USB, see p.52 “Installing the Printer Driver Using

USB” .

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.

Select an interface language, and then click [OK].

The default interface language is English.

Click [Quick Install].

The software license agreement appears in the [License Agreement] dialog box.

After reading the agreement, click [I accept the agreement], and then click

[Next].

Select the printer model you want to use in the [Select Printer] dialog box.

For network connection via TCP/IP, select the printer whose IP address is displayed in [Connect To].

For parallel connection, select the printer whose printer port is displayed in

[Connect To].

Click [Install].

The printer driver installation starts.

Click [Finish].

A message about restarting the computer may appear. Restart the computer to complete installation.

G1398505_1.00

9

Preparing for Printing

Click [Exit] in the first dialog box of the installer, and then take out the

CD-ROM.

❒ To stop installation of the selected software, click [Cancel] before installation is complete.

❒ Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.

❒ Select a printer to whose IP address is displayed in [Connect To] to install

SmartDeviceMonitor for Client when using TCP/IP.

Quick Install is not available unless bidirectional communication between the printer and computer is enabled via parallel connection. See p.72 “If Bidirectional Communication is Disabled” for details about bidirectional communication between printer and computer.