advertisement
Installing Options
Attaching Printer Hard Disk Type 3000
• Do not touch the inside of the controller board compartment. Doing so may cause a machine malfunction or a burn.
❒ Before touching the printer hard disk, touch something metal to discharge any static electricity. Static electricity can damage the printer hard disk.
❒ Do not subject the printer hard disk to physical shocks.
❒ Before using the new printer hard disk, you must make the settings in the printer driver.
A
Check the package contains the following:
❖ Printer Hard Disk Type 3000
❖ Screw
B
Turn off the power, and then unplug the power cable.
60
Installing Options
C
Remove the two screws securing the controller board to the back of the printer.
❒ These screws will be used again in step K to secure the controller board.
D
Hold the machine with one hand, grasp the handle with the other hand, and then slowly pull out the controller board.
❒ The controller board may be difficult to pull out.
E
Hold the handles with both hands, and then pull the controller board completely out.
61
Installing Options
The printer hard disk is to be installed to the position shown in the illustration.
F
Insert the printer hard disk by aligning it with the controller board slot.
Slide it in the direction of the arrow, and then connect it to the connector on the controller board.
G
Secure the printer hard disk using the supplied screw.
H
When installing other options on the controller board, do not close the controller board, but go to the steps for installing the option.
62
Installing Options
I
Align the controller board with the top and bottom rails, and then push it carefully in slowly until it stops.
J
Hold the machine with one hand, and then push the lower handle of the controller board with the palm of your other hand, until it stops.
❒ Malfunctions can occur if the controller board is not set properly.
K
Secure the controller board to the printer using the two screws removed in step C .
When the power is turned on, the printer hard disk will be formatted automatically.
63
advertisement
Related manuals
advertisement