Installing the PostScript 3 Printer Driver (Windows 2000 - IPP). Ricoh CLP22, LP222cn
Add to My manuals536 Pages
advertisement
Preparing for Printing
Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)
❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Add Port...].
H
Click [SmartDeviceMonitor], and then click [Next >].
I
Click [IPP].
J
In the [Printer URL] box, enter “http://(printer's address)/printer” as the printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter “https://(printer's address)/printer” (Internet Explorer
5.01, or a higher version must be installed).
(example IP address: 192.168.15.16) http://192.168.15.16/printer https://192.168.15.16/printer
You can enter “http://(printer's address)/ipp” as the printer's address.
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the name of any existing port.
24
Preparing for Printing
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.
L
Click [Detailed Settings] to configure proxy server, the IPP user name and other settings. Specify the necessary settings, and then click [OK].
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
N
Check that the name of the printer whose driver you want to install is selected, and then click [Next >].
O
Change the printer name if you want, and then click [Next >].
P
Click [Next >].
Q
Specify whether or not to print a test page, and then click [Next >].
R
Click [Finish].
The printer driver installation starts.
❒ A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003 - TCP/IP)
❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe”on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
25
Preparing for Printing
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [SmartDeviceMonitor], and then click [Next >].
I
Click [TCP/IP], and then click [Search].
A list of printers using [TCP/IP] appears.
J
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IP address or host name of the printer.
K
Check that the name of the printer whose driver you want to install is selected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Click [Next >].
N
Specify whether or not to print a test page, and then click [Next >].
O
Click [Finish].
The printer driver installation starts.
❒ A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003 - IPP)
❒ Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch “Setup.exe” on the CD-ROM root directory.
26
Preparing for Printing
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [SmartDeviceMonitor], and then click [Next >].
I
Click [IPP].
J
In the [Printer URL] box, enter “http://(printer's address)/printer” as the printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter “https://(printer's address)/printer” (Internet Explorer
5.01, or a higher version must be installed).
(example IP address: 192.168.15.16) http://192.168.15.16/printer https://192.168.15.16/printer
You can enter “http://(printer's address)/ipp” as the printer's address.
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.
L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
N
Check that the name of the printer driver you want to install is selected, and then click [Next >].
O
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P
Click [Next >].
27
advertisement
Related manuals
advertisement