783620H / 1013 2. INSTALLING GAMMAVISION
2.5. Product Registration
GammaVision now requires product registration within 60 days after installation. Until registered, the dialog shown in Fig. 7 opens each time you start the program. Click the Register
Later button to bypass registration and access the full-featured GammaVision application.
Once you enter the registration key and click Register Now, this dialog will no longer be displayed. After 60 daysof unregistered use, the Register Later option will be disabled and
GammaVision will shut down when you close this dialog.
Fig. 7. Register GammaVision.
To obtain your registration key and activate your copy of GammaVision, you may call the
ORTEC telephone extension listed on the GammaVision Registration dialog. You will need the serial number for your copy of the software (located on the box). Enter the registration key on the GammaVision Registration dialog and click Register Now.
Alternatively, you may fill out and submit the registration form as follows:
1) Click Generate ORTEC Registration Form to open the ORTEC Registration Form dialog shown in Fig. 8.
2) If any paper manuals are available for this release, they will be listed on the dialog. If you do
not wish to order paper manuals, simply enter the Serial Number for your copy of Gamma-
Vision. The number is located on the box. No other information is required for registration.
Skip to step 4.
15
