GammaVision
®
v7 (A66-BW) 783620H / 1013
Output File Naming Convention
Background Report File
The background report file is named according to:
B#ddmmyy.XXX
where
#
is the last digit of the instrument ID number as assigned by the MCB Configuration program; and
ddmmyy
is the analysis date as two-digit date, two-digit month, and the last two digits of the year.
Analysis Report File
Analysis report files, for gamma total and germanium reporting, are named according to:
#_ddmmyy.Seq
where
#
is the last digit of the instrument ID number as assigned by the MCB Configuration program;
ddmmyy
is the analysis date as two-digit date, two-digit month, and the last two digits of the year; and
Seq
is the spectrum sequence number, as determined by the entry in the Gamma Total Sequence and Germanium Sequence fields on the Gamma Total dialog.
Germanium Results File
The germanium reporting file is named according to:
DETAIL.Seq
where
Seq
is the spectrum sequence number, as determined by the entry in the Germanium
Sequence field on the Gamma Total dialog.
Maintenance Report File
These files, for cesium reporting, are named according to:
RDTCS_#.XXX
where
#
is the last digit of the instrument ID number.
Hardware and Analysis Configuration
Before acquiring data for a Gamma Total analysis, prepare the system as follows:
! The detector must be energy and efficiency calibrated.
188
