783620H / 1013 5. MENU COMMANDS
Print Graph
This command prints the Analysis Results Spectrum Window. It duplicates File/Save Plot.
Properties
This opens the Graph Properties dialog
(Fig. 189), which lets you set the graph colors, symbol type, and axis scaling factors. All settings are reset when you exit GammaVision.
The Text color affects the color of the axes, axis labels, and spectrum title. Back-
ground controls the color of the spectrum background. Markers applies to the ROI bars, and nuclide labels and pointers.
Data Set Colors allows you to choose separate colors for spectrum Data, Fitted peaks, and Residuals; select a data type from the left-hand droplist, then choose
Fig. 189. Customize Graph Styling.
a color from the list on the right. Similarly, use Fill Color to control the colors of ROIs, Nuclide Peaks, Unknown Peaks, Multiplets, and
Composites. Spectrum Style determines how the histogram data are represented (Points, Line, or Fill All).
The Show Nuclide Name checkbox allows you to hide or display the nuclide markers for an analyzed spectrum. Clearing the Show Axes checkbox removes the axes so the histogram occupies the entire window without an inside border.
Set the Y Axis Scale of the spectrum window to Linear or Logarithmic. You can also do this with the LOG button on the toolbar except as noted in the bullet list below..
The Draw Multiplet radio buttons determine whether multiplets are drawn as a Composite curve, shown individually (Each), or displayed as individual peaks superimposed with the composite curve (Both). These modes are compared in Fig. 190. This display is most easily seen with all Fill Modes turned off (checkboxes unmarked).
The Fill Mode checkboxes allow you to determine which peak types, if any, will be displayed in fill mode rather than data-point mode.
199
