5.7.5. Edit Detector List. ORTEC A66-BW GammaVision

783620H / 1013 5. MENU COMMANDS

Owner entry, click on OK (which will display an “Owner name must be supplied!”), then click on Cancel.

Fig. 217. Unlocking a Detector.

Fig. 216. Enter Owner and Password to

Lock a Detector.

Fig. 218. Name of Detector Owner.

Fig. 219. Password Required To Unlock

Detector.

5.7.5. Edit Detector List...

This function allows you to select the Detectors that will be available to GammaVision on this

PC. Other C

ONNECTIONS applications (e.g., ScintiVision

™

, AlphaVision

®

, MAESTRO) on the same PC can have their own lists. In this way, the different Detectors on the network can be segregated by function or type.

NOTE

When you invoke this command, all Detector windows close without warning, all buffer windows close with a warning, and a buffer window opens, followed by the

Detector List Editor dialog! The buffer window remains open after you have closed the editor dialog.

Figure 220 shows the Detector List Editor dialog. On the left is the Master Detector List of all

Detectors on the system. This master list is created by the MCB Configuration program (see

Section 2.3) and is the same for all ORTEC programs running on all PCs connected to the workgroup. The default description for each instrument is derived from the hardware and can be changed within the configuration program.

219

GammaVision

®

v7 (A66-BW) 783620H / 1013

Fig. 220. Detector List Editor Dialog.

The GammaVision MCA Pick List initially contains all of the instruments in the master list.

! Add — To add a Detector to the GammaVision Pick List for this PC, click on the name in the Master list, then click on Add. To add all the Detectors on the Master Detector

List, click on All.

! Remove — To remove a Detector from this local pick list, click on the name in the Pick

List and click on Remove. To remove all the Detectors, click on New.

When Detector selection is complete, click on OK. These selections will be saved to disk and used by GammaVision until changed on this screen or until the entire network is reconfigured.

C

ONNECTIONS

programs such as GammaVision can have more than one Detector pick list on the

PC. For more information on creating and using alternate pick lists, see the

-P listname

discussion on page 437.

220