GammaVision
®
v7 (A66-BW) 783620H / 1013
Fig. 76. Comparison of Uncertainty and ZDT Spectra Showing Labels in Full
Spectrum View.
5.2.11. MCB Properties...
C
ONNECTIONS
applications use a uniform dialog for data acquisition setup, accessed with the
Acquire/MCB Properties... command. The property pages for the DSPEC-50 are described here. To see the Properties dialog for other C
ONNECTIONS
MCBs, refer their respective hardware manuals.
Depending on the currently selected Detector, the Properties dialog displays several tabs of hardware controls that may include ADC setup parameters, acquisition presets, high-voltage controls, amplifier gain adjustments, gain and zero stabilizers, pole-zero and other shaping controls, the
InSight™ Virtual Oscilloscope, digital noise-suppression filters, and radionuclide detection reports. In addition, some MCBs monitor conditions such as detector temperature, external input status, alpha chamber pressure, charge remaining on batteries, and the number of spectra collected in remote mode, which are reported on a Status tab. Simply move from tab to tab and set your hardware parameters, then click Close. Note that as you enter characters in the data entry fields, the characters will be underlined until you move to another field or until 5 seconds have lapsed since a character was last entered. During the time the entry is underlined, no other program or PC on the network can modify this value.
76
