5.2. Acquire. ORTEC A66-BW GammaVision

GammaVision

®

v7 (A66-BW)

5.2. Acquire

The Acquire menu is shown in Fig. 73. Access to the various functions depends on whether the a Detector or buffer window is currently active (for example, if a buffer window is active the

Detector controls are disabled and MCB Properties... is readonly). The List Mode, Download Spectra and View ZDT Cor-

rected commands are available only for supported hardware

(which is listed in the discussion for each of these functions).

NOTE

In some cases, a Detector option might be disabled because it is not supported by the current Detector

(while it might still be valid for some other Detector in the system, or for this Detector under different conditions).

5.2.1. Acquisition Settings...

This command opens the

Acquisition Settings dialog

(Fig. 74), which allows you to control a number of questions that can be “asked on start” (when a Detector is started) and their default values.

To take advantage of the multi-detector capability, the Group Acquisitions settings apply to the Start,

Stop, Start/Save/Report, and Clear commands. You can control acquisition in all displayed Detectors simultaneously (All MCBs) or one

Detector at a time (Current

MCB); or be asked if you wish to apply an acquisition command to one or all displayed Detectors (Prompt).

Fig. 74. Acquisition Settings.

70

783620H / 1013

Fig. 73. Acquire Menu.