GammaVision
®
v7 (A66-BW) 783620H / 1013
This flag is handled differently for the ISO NORM calculations than for the regular Gamma-
Vision report. If an isotope flagged as NO MDA is not detected in the sample, it is not reported in the standard GammaVision report sections unless the Directed Fit flag is turned on. However, the isotope is always reported in the ISO NORM table.
The Activity Not in Total flag indicates that the activity for this nuclide will not be included in the total activity for this sample.
These flags are listed on the report and saved in the
.UFO
file.
Manually Adding Nuclides
To manually add a nuclide to the library list, locate the nuclide immediately below the desired insertion position, and click once to highlight it. Next, click the manual Insert... button to open the Edit Library Nuclide dialog. The dialog will be blank. Fill in the name and half life as well as any other inputs and click OK.
Deleting Nuclides from the Library
To remove a nuclide from the library, click the nuclide, then
Cut. This will remove the nuclide from the list. In addition, it will activate the gray Paste button at the bottom of the nuclide list, and change its label to include the name of the cut nuclide. This is illustrated for
152
Eu in Fig. 206.
Fig. 206. Cut Nuclide is Ready to Paste.
Rearranging the Library List
The order of the nuclides in the library is the order in which they are listed on the report. Nuclides can be rearranged in the
.LIB
file list by cutting and pasting them into a different location. To move a nuclide to a new position in the list, highlight the nuclide to be moved; Cut it from the list; locate the nuclide immediately below the desired new position and click once on that nuclide to highlight it; then click the Paste button (which will be labeled with the name of the Cut nuclide). The Cut nuclide will be inserted in the space above the highlighted nuclide.
Several nuclides can be cut at one time from the list, then pasted back into the list into a different order. Cut nuclides remain queued up for pasting, last one first, according to the nuclide name on the Paste button.
To move a nuclide to the end of the library list, Cut the nuclide from the list, highlight the
--end-- entry, and click the Paste button.
212
