783620H / 1013 5. MENU COMMANDS
Read From File — Efficiency
If you selected Read From File for the efficiency calibration, the dialog shown in Fig. 122 opens. Enter the name of the file in which the desired efficiency calibration is stored. The calibration Description stored in the file is displayed (read-only) so you can more easily choose the correct file and reduce errors. Any type of file that stores calibration records can be used.
Fig. 122. Select the File Containing the Desired Efficiency
Calibration.
This function operates the same as Calibrate/Recall Calibration (recalling the efficiency calibration only).
When finished, click Next.
Read from File — TCC
If you selected Read From File for the TCC calibration, the dialog shown in Fig. 123 opens.
Enter the name of the file in which the desired TCC calibration is stored. Since the TCC is linked to the efficiency, this will load both the efficiency and the TCC calibration parameters. Be sure to use the same file for the efficiency calibration (Read From File — Efficiency) and TCC calibration; otherwise, the TCC calibration loaded may not be complete and will not produce accurate results.
The calibration Description stored in the file is displayed (read-only) so you can more easily choose the correct file and reduce errors. Any file that stores calibration records can be used.
139
