GammaVision
®
v7 (A66-BW) 783620H / 1013
the recalled file. If the oldest buffer contains data that have not been saved, a warning dialog will first ask if the data should be saved.
Click Yes to save and No to close without saving.
When the spectrum is successfully recalled, GammaVision loads its descriptors (start time, live time, real time, Detector and sample descriptions) and calibration information (if any), and displays the filename on the title bar. For spectrum files containing multiple spectra (such as ZDT mode in supported ORTEC instruments), both spectra are automatically recalled.
5.1.3. Save/Save As...
These functions open a standard
Windows file-save dialog (Fig. 67) so you can save the current spectrum to disk. Use Save As... to rename an existing spectrum. If you attempt to overwrite an existing filename, a message box opens asking you to verify the entry or cancel the save.
Clicking OK overwrites the existing file. After the disk file has been saved, its filename is displayed on the title bar.
Fig. 66. Recall a Spectrum File.
PHA Mode Spectra — The default
Fig. 67. Save As.
format is specified on the General tab under File/Settings... (Section 5.1.1.1); see that section for a brief description of the
.CHN
,
.SPC
, and
.SPE
file types. Note that you can select any of these file types at the time you save the file, and the save dialog will remember the most recent file type used. or hardware with multiple spectra (such as ZDT mode in the DSPEC Pro), both spectra will be saved in the file. PHA mode spectra cannot be saved in the
.LIS
(List Data) format.
64
