783620H / 1013 9. KEYBOARD FUNCTIONS
9.4.3. ZDT Compare <Shift+F3>
For ZDT-supporting instruments in Compare mode, this accelerator switches the compare spectrum between the ZDT spectrum and its accompanying LTC or ERR spectrum. Used in combination with <F3> or Acquire/ZDT Display Select, it allows you to display the normal-to-ZDT, uncertainty-to-ZDT, ZDT-to-normal, or ZDT-to-uncertainty comparisons.
9.4.4. Detector/Buffer <F4>
The <F4> key switches between the display of the data in the Detector and the data in the buffer.
It duplicates the function of <Alt + 6> and Display/Detector/Buffer; see Section 9.3.5.
9.4.5. Taller/Shorter <F5>/<F6>
These keys decrease or increase the vertical full scale of the displayed spectrum so the peaks appear taller or shorter, respectively. They duplicate the function of the <
8
> and <
9
> keys. The vertical scale value is always shown on the toolbar.
9.4.6. Narrower/Wider <F7>/<F8>
These keys increase or decrease the horizontal scale of the data display so the peaks appear narrower or wider, respectively. They duplicate the function of <-> and <+> keys. The horizontal scale value is always shown on the toolbar.
9.4.7. Full View <Alt + F7>
Full View adjusts the horizontal and vertical scaling to display the entire spectrum in the
Expanded Spectrum View. This duplicates Display/Full View; see Section 5.9.9.
9.4.8. Select Detector <Ctrl + F1> through <Ctrl + F12>
These keys display the spectrum for the specified Detector n (where n = 1 to 12, corresponding to <Ctrl+ Fn>, in the order that the Detectors are defined in the Detector pick list; see
Section 5.9.1). The selected Detector name (or the buffer) is shown on the toolbar.
These keys duplicate the function of the Detector pick list on the toolbar, and the Detector... dialog under the Display menu. However, you should be aware of which Detector numbers are available when using the function keys. An error message box will appear if the selected Detector is invalid. In systems with more than 12 Detectors, use Display/Detector... or the droplist on the toolbar.
383
