GammaVision
®
v7 (A66-BW) 783620H / 1013
Rearranging the Peak List
The entries in the peak list can be rearranged with the Cut and Paste buttons. Several peaks can be cut at one time from the list, then pasted back into the list into a different order. Cut peaks remain queued up for pasting, last one first. Each relocated nuclide will retain its energy and counts/sec values, but will be assigned a Rank number according to its new position. Click the peak just below the desired insertion point in the peak list, then click Paste.
5.6.3.4. Saving or Canceling Changes and Closing
To save this modified
.LIB
file and use it as the working file, click the control menu, then Save
Library As.... Either use the current filename (which will overwrite the previous values) or assign a new filename, then click Save. (GammaVision will assign the default
.LIB
extension.)
To exit the edit session, click the control menu, then Close.
To abandon any changes and restore the
.LIB
file to its condition before editing, click the control menu, then Close. A dialog will open asking if the changes should be saved; select No.
5.6.4. List...
The List... function (Fig. 208) will print a list of the library, ordered either by Nuclide or
Energy, to either the printer or a disk file.
Fig. 208. Print Library to Printer or File.
214
