Screen Display
Section 4-3
4-3 Screen Display
This section describes the screen information required for the operation with the NT20.
For details on how to change the displayed screen, refer to 5-1-4 Switching
the Screen Display on page 172, and Display Specified Screen on page 216.
For the methods used to ascertain the screen number of the screen currently
displayed, refer to 5-1-5 Notifying the PLC of the Display Screen (to Display
the Number of Currently Displayed Screen) on page 174, and Request
Screen Number on page 216.
4-3-1 Classification of Screens
The NT20 is provided with the following types of screens which are classified by the display method.
• Normal screen
• Overlapping screen
• Continuous screen
The screen type is set with each screen in the “Screen List” screen of the
Support Tool. Select a screen type according to the purpose, and create characters and figures on the screen.
Normal Screen
Overlapping Screen
A normal screen is the basic screen of the NT20. It is not necessary to select a screen type (overlapping or consecutive) when to create the screen data on a normal screen.
When a normal screen is selected, existing screens will be erased and a normal screen will be displayed.
Several normal screens can be overlapped and displayed as one screen. A group of overlapped screens is called an “overlapping screen”.
Several normal screens are displayed in the order of screen numbers which have been designated to each screen and form an overlapping screen. Up to eight screens can be overlapped to form one overlapping screen. The base screen used for making an overlapping screen is called a “parent screen”, and a bunch of screens which are laid over the parent screen are called “child screens”.
All display elements can be used on a parent screen.
The screen attributes such as a buzzer attribute set in the parent screen become effective in an overlapping screen.
Example Overlapping Screens
Screen #10
(1)
This is an
Screen #8
This is an overlapping screen.
(2)
Screen #7 overlapping
Screen #25
(3) screen.
• Parent screen: #8
• Child screens: #10, #7, and #25
140
Screen Display
Section 4-3
Continuous Screens
When screen #8 is designated, screen #8 becomes the parent screen and the child screens #10, #7, and #25 are displayed over the parent screen in that order.
Only one numeral setting screen which allows numeric values to be set on the
NT20 screen can be registered as a child screen. For the numeral setting,
refer to 4-8 Numeral Setting (page 156).
Make sure that the touch switches and numbers set in the normal screens do not overlap in an overlapping screen. If the set positions of the touch switches and/or numbers in the normal screens overlap with each other, such settings may sometimes not be effective as intended. Use the Support Tool and make sure that the set positions do not overlap with each other.
A group of normal screens which are related in series and can be switched consecutively is called the “continuous screens”. Up to eight screens can be registered to one screen as a group of continuous screens.
The base screen used for registering the continuous screens is called a “parent screen”, and the registered continuous screens are called “child screens”.
The current screen number and the total number of continuous screens can be displayed in the top right corner of the screen. This is called the “page number display”.
The page number is set when creating the screen data by using the Support
Tool. Refer to the “NT-series Support Tool for Windows Operation Manual”
(Cat. No. V061-E1-
@).
All display elements except “numeral setting” can be used in the continuous screens.
The screen attributes set in the parent screen become effective in the continuous screens.
Example Continuous Screens
1/3
Continuous screen (1)
Screen #20
touch switch
touch switch
2/3
Continuous screen (2)
Screen #15
touch switch touch switch
3/3
Continuous screen (3)
Screen #5
• Parent screen: #10
• Child screens: #20, #15, and #5
When screen #10 (continuous screen) is designated, screen #20 which is page 1 of the continuous screens will be displayed. Screen #15 or #5 can be displayed by using the touch switches. Since screen #10 has been set for the continuous screens, that screen cannot be displayed as an individual screen.
Switching Continuous Screens Using Touch Switches
Continuous screens can be switched by using the and touch switches which have the system key functions.
When creating the screen, create touch switches and to which the sys-
tem key functions are allocated. (Refer to 4-7-3 System Key Functions on page 154.)
141
Screen Display
Section 4-3
Production Status
Line A: Normal
Line B: Normal
1/3
4-3-2 Screen Attributes
Each screen can be set with a specific function by designating a screen attribute, so that the specific function can be executed by displaying the screen. For example, by displaying a screen to which a “buzzer attribute” has been set, the buzzer of the NT20 starts sounding.
Set the screen attributes for each screen on the “screen selection” screen of the Support Tool.
Note that the Support Tool displays some items that are not used with the
NT20.
The following several attributes can be set with one screen.
Buzzer Attribute
Numeral Setting Attribute
Note
Bit Input Attributes (NT20-
ST128 Only)
This attribute will become effective to sound the buzzer in the NT20 when the screen to which this attribute has been set is displayed. The buzzer sound can be set as follows:
No: Buzzer does not sound when the screen is displayed.
Continuous sound: Buzzer sounds continuously.
Intermittent sound: Buzzer sounds intermittently at constant intervals.
The buzzer sound is set with the NT20 memory switch. The buzzer can also
be set by using the Host. Refer to 3-8-2 Using the Buzzer on page 107 for the
buzzer setting using the memory switch.
To stop the buzzer by using the screen operation, create a system key as a touch switch.
Select whether the numeric keys are automatically displayed or the numeric keys are created at arbitrary positions on the numeral setting screen. The following two numeral setting attributes are used.
System: The numeric keys registered to the system are automatically displayed.
User: The numeric keys can be created at any arbitrary positions.
If the numeral setting attribute on the NT20 has been set for “system”, the touch switches [ENT], and which are allocated to the system besides the
numeric keys need to be created. (Refer to 4-7-3 System Key Functions on page 154.)
Select whether the host is notified of the touch switch number or bit information when the touch switch is pressed. There are two types of bit input attribute in the screen attributes, as described below:
• Off: Bit control when a touch switch is pressed is invalid. Notification of the status of the touch switch is provided using its number.
142
Screen Display
Backlight Attributes
Section 4-3
• Touch SW:Bit control when a touch switch is pressed is valid. Notification of the status of the touch switch is provided using bit information.
Select whether the backlight is lit or flashes when the screen is displayed.
There are two types of backlight attribute in the screen attributes, as indicated below:
• Lit: Backlight is lit when the screen is displayed.
• Flashing: Backlight flashes when the screen is displayed.
143