Appendix I
Function Restrictions Depending on the
Support Tool
Screens can be created for Host link, NT link, or C200H direct communications by using the conventional Support Tool indicated below.
In addition, the NT series Support Tool (Ver.2.
@) can be used with Ver.4 of the direct connection function.
However, when the above Support Tool is used, restrictions apply to some functions as shown in the table below.
The expressions used for the Support Tools In the table have the following meanings.
NT V2: NT Series Support Tool (Ver.2.
@)
Support Tool
NT V2
NT Model Direct
Connection
NT20M Ver. 4
NT20S Ver. 4
NT20S Ver. 5
Communications Mode Support Tool
Mode
(NT20S memory switch)
Standard NT20M
Standard/High-speed
Standard/High-speed
NT20S
NT20S
Restrictions
250 screens max.,
Thumbwheel numeral settings not possible, no upper/ lower limits, hexadecimal input not possible, indirect specification not possible, touch switch input notification fixed as “momentary”, data transmission in screen units not possible.
No restriction
The NT20 cannot be used with combinations of Support Tools and settings other than those indicated above.
Reference: The RS-232C can be used in the same way with the NT series Support Tool (Ver.2.
necessary Support Tool and “Tool Mode” (NT20 memory switch) settings in this case are as follows:
NT Model: NT20S
@). The
Direct setting: No
Communications mode: Standard/High-speed
Tool Mode: NT20S
281
Function Restrictions Depending on the Support Tool
Appendix I
282
Index
Numerics
25-pin connector
,
267
9-pin connector
,
268
A
allocatable bits and words
,
166
automatic reset function
,
98
B
backlight
,
205
backlight mode
,
205
bar graphs
,
147
before operating
,
14
buzzer attribute
,
205
C
cable preparation
,
265
changing displayed numerals or character strings
,
182
changing displayed numerical values or character strings
,
184
changing the status of allocated bits
,
195
changing the system settings
,
83
character string memory table direct specification
,
177
displaying and referencing
,
177
indirect specification
,
177
initialization setting
,
178
number of registration words
,
178
setting
,
178
checking the PT setting
,
122
Communications Board
,
44
,
57
,
60
,
65
communications methods
,
8
communications port
,
8
communications type
,
8
comparison between NT20S, NT20M, and NT20
,
6
compatibility with NT2OM/NT20S
,
4
CompoBus/S Master Control Units manual
,
15
connecting directly between RS-232C ports
,
69
connecting the NT Support Tool
,
35
connection method
,
8
continuous buzzer
,
205
continuous buzzer sound
,
108
controlling the display elements
,
167
controlling the NT20 status
,
168
CPUs
,
57
,
60
,
65
D
data transmission in screen units
,
102
description of parts
,
18
determining touch switch status
,
196
dimensions
,
261
DIP switch settings
,
19
,
124
display numeric values (numeral table)
,
7
reverse and flashing display
,
138
,
145
display elements character-string memory table
,
11
lamps
,
10
numeral memory table
,
11
touch switches
,
11
displaying the system menu
,
86
displays bar graphs
,
7
characters (character-string memory table)
,
7
characters (text)
,
7
lamps
,
7
marks
,
7
numeric keys
,
7
touch switches
,
7
E
EC Directives
, xx
EMI Standard
, xxi
EMS Standard
, xxi
enlarged display
,
137
,
145
error messages
,
213
,
249
F
file units
,
102
G
graph frame
,
147
283
284
H
hardware faults
,
212
,
248
host link method
,
44
Host Link Unit
,
44
Host Link Units manual
,
15
I
I/O check
,
115
buzzer
,
119
communications with the Support Tool
,
116
LCD
,
118
LED
,
120
screen memory
,
121
touch switches
,
115
initialization by using the DIP switch
,
90
initialization by using the system menu
,
88
initializing memory
,
88
inspection and cleaning
,
218
,
253
intermittent buzzer
,
205
intermittent buzzer sound
,
108
IP65 waterproof requirements
,
4
K
key press sound
,
106
L
lamps
,
150
language function
,
110
M
maintenance of the NT20
,
216
,
253
marks
,
137
memory switches
,
91
memory table character-string memory table
,
144
copying
,
186
numeral memory table
,
145
menu item
Maintenance Mode
,
87
Quit
,
87
Transmit Mode
,
87
Index
menu tree
,
84
model list
,
269
N
ng
,
195
notification of display elements
,
170
notification of NT20 status
,
170
notification of numbers to the PLC
,
199
notification operation alternate
,
193
momentary
,
193
reset
,
194
set
,
194
NT Link
1:1 NT Link
,
56
1:N NT Link
,
60
high-speed 1:N NT Link
,
65
NT Support Tool connecting
,
35
manual
,
15
NT20 status control
,
199
numeral memory table direct specification
,
179
displaying and referencing
,
178
indirect specification
,
179
initialization setting
,
180
number of registration words
,
180
numeral setting
,
156
numeric key type
,
157
thumbwheel type
,
158
numeric keys
,
158
O
operating status
,
209
operation flow
,
82
operation panel
,
22
operation with the system menu
,
86
P
power supply connection
,
23
precautions
,
xvii
EC Directives
,
xx
Programming Tools manuals
,
15
PT operating status
,
208
PT status
,
208
PT status control area
,
12
,
168
,
203
PT status notify area
,
12
,
170
R
radiated emission
, xxi
S
screen child screen
,
140
classification
,
140
composition of the screen
,
136
continuous screen
,
141
normal screen
,
140
NT20 screen
,
136
overlapping screen
,
140
parent screen
,
140
screen display
,
140
screen management
,
136
special screen number
,
136
switching the continuous screens
,
141
screen attributes backlight attribute
,
143
buzzer attribute
,
142
numeral setting attribute
,
142
screen data
,
102
screen display
,
203
screen switch setting
,
172
screen switch strobe
,
174
,
209
screen switch timing
,
173
screen switching function
,
154
screen switching strobe
,
171
,
173
screens creating
,
134
selecting the host communications method
,
93
selecting the host communications port
,
94
selecting the host link communications speed
,
95
selecting the menu items
,
87
selecting the NT link (1
N) communications speed
,
96
selecting unit numbers
,
97
Serial Communications Board
,
44
,
61
,
65
Serial Communications Boards manuals
,
15
Serial Communications Unit
,
44
Index
serial port A
,
8
serial port B
,
8
setting the buzzer
,
107
smoothing
,
137
,
145
soldering
,
266
specifications
,
255
starting the NT20
,
83
Support Tool connecting the NT Support Tool
,
35
Support Tool mode setting
,
111
switching the screen display
,
172
switching to the RUN mode
,
105
System Installer manual
,
15
system key functions
,
154
system menu
,
84
system program erasing
,
127
transferring
,
126
system transfer tool
,
126
T
touch switches
,
152
transmitting the screen data
,
103
U
upgrade bar graphs
,
189
upper/lower limit check
,
157
using numeric keys
,
160
using the thumbwheel type
,
161
285
286
Index
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. V091-E1-01
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer to the previous version.
Revision code
01
Date
March 2007 Original production
Revised content
287
288
Revision History
OMRON Corporation
Control Devices Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7109/Fax: (81)75-344-7149
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg, IL 60173
U.S.A.
Tel: (1)847-843-7900/Fax: (1)847-843-8568
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
Singapore 239920
Tel: (65)6835-3011/Fax: (65)6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120 China
Tel: (86)21-5037-2222/Fax: (86)21-5037-2200
Authorized Distributor:
Cat. No. V091-E1-01 Note: Specifications subject to change without notice
This manual is printed on 100% recycled paper.
Printed in Japan