advertisement
Chapter 3: Introduction to the Avaya 1120E
IP Deskphone
Your Avaya 1120E IP Deskphone brings voice and data to your desktop. The IP Deskphone connects directly to a Local Area Network (LAN) through an Ethernet connection. The IP Deskphone with SIP software communicates using Session Initiated Protocol (SIP) after the software is upgraded to a SIPenabled version.
In this guide, user-defined feature key labels appear beside the keys and context-sensitive soft keys labels appear directly above the keys. Figure 1 shows the user-defined feature keys and context-sensitive soft keys.
Figure 1: User-defined feature keys and context-sensitive soft keys
Basic features
Your Avaya 1120E IP Deskphone supports the following features:
• four user-defined feature keys with labels and indicators
Note:
The IP Deskphone designates Key 1 as Feature Key 1 and reserves it as the line key for the IP Deskphone.
• four context-sensitive soft keys
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura ® User Guide November 2013 17
Introduction to the Avaya 1120E IP Deskphone
• graphical, high-resolution LCD display, backlit, with adjustable contrast
• high-quality speaker phone
• volume control keys for adjusting the ringer, speaker, handset, and headset volume
• six specialized feature keys:
- Quit
- Directory
- Inbox
- Outbox
- Services
- Copy
• six call-processing fixed keys:
- Mute
- Handsfree
- Goodbye
- Instant Message Log
- Headset
- Hold
• gigabit Ethernet ports
• built-in gigabit Ethernet switch for shared PC access
• headset jack with an On/Off key
• USB port to support a keyboard or mouse
Note:
Powered downstream 1.1-compliant USB hubs are supported, including USB 2.0 hubs, if they offer USB 1.1 backwards compliancy.
• automatic Dynamic Host Configuration Protocol (DHCP) network configuration
• hearing aid compatibility
• intercom/paging support
• secure digits when accessing voice mail during a call
• logging off the IP Deskphone without entering a password
• dialing a call from the Inbox
• the capacity to attach up to three Expansion Modules for Avaya 1100 Series IP
Deskphones, adding up to 54 programmable feature keys
18 Avaya 1120E IP Deskphone with SIP Software on Avaya Aura ® User Guide
Comments? [email protected]
November 2013
advertisement
Related manuals
advertisement
Table of contents
- 17 Basic features
- 19 Avaya 1120E IP Deskphone controls
- 22 Key press behavior
- 23 Avaya 1120E IP Deskphone display
- 24 Context-sensitive soft keys
- 29 Idle display screen after dial pad input
- 30 In-call context-sensitive soft keys
- 32 Navigation keys
- 34 Visual indicators
- 34 Display screen icons
- 36 Visual Alerter/Message Waiting Indicators
- 36 Using a USB Mouse
- 37 Security features
- 37 Secure connection
- 39 Before you begin
- 39 Connecting the components
- 41 Removing the stand cover
- 42 Connecting the AC power adapter (optional)
- 43 Connecting the handset
- 43 Connecting the headset (optional)
- 43 Selecting the headset tuning parameter
- 44 Connecting the LAN ethernet cable
- 45 Installing additional cables
- 45 Wall-mounting the IP Deskphone (optional)
- 47 Entering text
- 47 Using the dialpad
- 48 Entering text using the IP Deskphone dialpad
- 49 Enabling and disabling the # Ends Dialing feature
- 50 Configuring the dialpad to alphanumeric dialing
- 50 Entering text using the USB keyboard
- 53 Logging on
- 54 Automatic login
- 54 Configuring the domain
- 55 Password protection for domains
- 55 Selecting a language
- 55 Logging on to your Avaya IP Deskphone
- 57 Configuring the duration of the login
- 57 Logging on to multiple user accounts
- 58 Timed logoff
- 58 Timed logoff while IP Deskphone is idle
- 58 Timed logoff while on a call
- 59 Selecting a location
- 59 User Profile
- 60 Overwriting your personal Address Book
- 60 Confirmation logon screen
- 61 Logging off from the IP Deskphone
- 61 Logging off multiple user accounts
- 61 Making an emergency call
- 62 Location information
- 63 Adjusting the display screen contrast
- 64 Configuring the backlight
- 64 Creating the idle screen text display
- 65 Configuring Menu Auto back-out
- 66 Selecting a ring pattern
- 66 Adjusting the volume
- 67 Adjusting the ring volume
- 67 Adjusting the volume of the Handset, Headset, and Handsfree mode
- 69 Adjusting the paging ring volume
- 69 Selecting a language
- 70 Selecting the date and time format
- 71 USB headset
- 72 Headset menu
- 74 Presence of USB headset
- 74 Audio format selection
- 75 Generic USB headset
- 75 Avaya USB headset adapter with HID
- 78 Third–party USB headsets with HID
- 81 Analog Terminator Adapter for analog (500/2500-type) telephone or fax machine
- 85 Making a call using off-hook dialing
- 86 Making a call using on-hook dialing
- 87 Using handsfree calling
- 88 Using Call Subjects
- 89 Managing Call Subjects
- 89 Adding a Call Subject
- 90 Deleting a Call Subject
- 90 Editing a Call Subject
- 93 Caller identification
- 93 Answering an incoming call
- 94 Redirecting an incoming call
- 95 Ignoring an incoming call
- 97 Viewing the Address Book
- 97 Initiating a call from the Address Book
- 98 Adding a contact to your Address Book
- 99 Editing a contact in your Address Book
- 100 Copying information to the Address Book
- 101 Searching for a contact in the Address Book
- 102 Using the Search feature in the Address Book
- 103 Using Local Search
- 104 Using Global Search
- 107 Call Inbox
- 107 Accessing the Call Inbox
- 108 Managing calls in the Call Inbox while not on a call
- 109 Viewing the details of a call in the Call Inbox
- 109 Managing missed calls
- 110 Missed Calls Notification
- 111 Initiating a call from the Call Inbox
- 111 Deleting calls in your Call Inbox
- 112 Accessing the calls in your Call Inbox during a call
- 112 Call Outbox
- 113 Accessing the Call Outbox
- 113 Managing calls in the Call Outbox while not on a call
- 113 Initiating a call from the Call Outbox
- 114 Deleting calls from your Call Outbox
- 114 Viewing the details of a call in the Call Outbox
- 115 Accessing the calls in your Call Outbox during a call
- 117 Configuring Instant Messaging
- 117 Instant Message automatic pop-ups
- 118 Configuring Instant Messaging pop-ups
- 118 Configuring IM audible alert
- 119 Composing an Instant Message
- 119 Instant Message Inbox/Outbox
- 120 Accessing Instant Messages
- 120 Viewing the content of an Instant Message
- 121 Replying to an Instant Message
- 121 Initiating a call from an Instant Message
- 122 Deleting an Instant Message
- 123 Making a new call
- 124 Initiating a call using the active call soft key menu
- 124 Ring Again Busy / Automatic Callback
- 125 Whisper Page
- 125 Call Waiting
- 125 Placing a call on Hold
- 126 Multiple calls On Hold
- 130 Using 3-way calling
- 130 Ad hoc conferencing when connecting to the Call Server
- 131 Transferring a call
- 133 Using Park Call
- 134 Using the Friends feature
- 134 Accessing your Friends list
- 135 Editing information of a friend
- 136 Feature keys
- 137 Feature key programming
- 142 Remove a programmed feature key
- 143 Feature key autoprogramming
- 145 Creating a feature key using the Copy key
- 146 Using Call Forward
- 148 Configuring Do Not Disturb
- 149 Configuring a Presence state
- 151 Adding a new Presence state message
- 151 Audio Codecs
- 152 Audio Codec Selection
- 152 Audio Codec Ordering
- 152 PC Client softphone interworking with the IP Deskphone
- 153 Automatic remote software updates
- 154 Busy lamp field
- 154 Group Call Pickup
- 157 Viewing the IP Deskphone information
- 158 Accessing the Services menu
- 158 Checking for Updates
- 159 Resetting the IP Deskphone
- 160 Erasing the user data
- 162 Network menu
- 163 USB flash drive
- 164 Customizable banner for login
- 164 Phone Information - Details screen
- 165 Screensaver/screen lock
- 168 Background image
- 168 Selecting an image screen
- 169 Service Package Group Support
- 169 Bulk-create feature keys based on an existing directory Address Book group
- 170 View existing groups in your Address Book if you selected Groups
- 171 View the existing groups you have in your Address Book
- 172 Add a new contact to your Address Book
- 173 Add a new group
- 173 Speed Dial List
- 174 Speed Dial List screen
- 175 Auto-Retrieve flag
- 175 USB flash memory device support
- 177 File Manager
- 178 USB scenarios
- 179 Multi-Level Precedence and Preemption
- 180 Overview
- 180 Other MLPP service features
- 181 Making a call with MLPP
- 182 Making an MLPP call by going off-hook
- 183 Making an MLPP call using Inbox/Outbox, Address Book, and Friends List
- 183 Making an MLPP call from a received Instant Message
- 184 Making an MLPP call by using a programmed speed dial key
- 184 Incoming calls with precedence
- 185 Call transfer with precedence
- 186 Multiple calls
- 186 Preemption
- 189 Call Origination Busy
- 190 Re-authorization
- 190 Feature interactions with MLPP
- 191 Announcement Record / Listen
- 192 Abbreviated Dialing Lists
- 192 Change Class of Restriction
- 192 Change Coverage
- 192 EC500 Self Administration
- 193 Malicious Call Trace Activation
- 193 Station Lock and Unlock
- 195 Initial login
- 195 Additional logins
- 196 Automatic login
- 196 Logging out
- 196 Primary account logout
- 197 Secondary account logout
- 197 Server failover
- 197 Cable unplugged
- 198 Upgrade impacts to user profiles
- 198 Line keys
- 199 Making a call
- 200 Receiving a call
- 200 Being in a call
- 201 Instant Messages
- 201 Menu features
- 202 Modifying settings
- 202 Per-account call notification options
- 202 IM Settings
- 202 Voice Mail Settings
- 203 Remembering settings after logout
- 203 Programmable keys
- 204 Inbox, Outbox, IM log
- 204 Address books
- 205 User status
- 205 Do Not Disturb
- 206 Presence
- 207 Call Forwarding
- 208 Notifications
- 208 Account selection
- 209 Receiving a call