USB flash drive. Avaya 1120E

USB flash drive

OR

Press the Prefs soft key, and then select Network from the menu.

Note:

You need to enter an administration password to access the Network menu items.

USB flash drive

A standard USB flash drive can be used for the following:

• To expand the hardware storage in the IP Deskphone.

• To support file transfer between a PC and the IP Deskphone to upload specific files or preferences into the IP Deskphone.

• To back up data stored in the IP Deskphone.

Presence of USB flash drive

Navigate through the menus Services > Phone Information > USB to verify the presence of the USB flash drive attached to the IP Deskphone. After you select the USB menu, the attached

USB flash drive is displayed along with other USB devices. The name of the USB device directly appears from the USB device itself. There is no explicit USB flash drive indication.

Feature characteristics

USB flash drives with 8 GB or less are supported. A file browsing facility is available.

Most USB flash drives have an LED to indicate file operation in progress. After you attach the

USB flash drive to the IP Deskphone, the IP Deskphone registers and mounts the USB file system. Mounting the file system causes the LED to flicker. If you disable USB device support, then the IP Deskphone does not mount the USB file system and the LED does not light.

There is no explicit safe removal function required. The USB flash drive can be removed safely when the LED indicator on the memory stick is off.

Enabling or disabling the USB Port

In the Services > Phone Information > USB Devices menu display, if the value of Enable

USB Port is No then the USB information does not display any USB devices connected. The screen displays the information that the USB port is disabled.

If the USB port is not disabled, then the USB menu displays information on all USB devices attached, even if the device is locked. An unsupported device is enumerated if it is attached to the IP Deskphone.

To ensure you know about the USB lock status, the USB device information is followed by status information about supported USB devices. If the USB configurations do not match the

USB device status because of the restart requirement, a warning that USB Update requires reboot appears on the screen.

Avaya 1120E IP Deskphone with SIP Software on Avaya Aura ® User Guide November 2013 163