Making a call using on-hook dialing. Avaya 1120E

Making a call

Press the Redial soft key to dial the last dialed number.

Note:

The Redial context-sensitive soft key only appears if a number or address was previously entered.

OR

Press the Msgs soft key and then select Voice Mail from the Messages menu to access your voice mail.

OR

Press the Speed dial feature key that you programed to call with a commonly used or important phone number or SIP address.

Note:

You can program a feature key to use as a shortcut to dial a number or a SIP address. For more information, see

Feature keys

on page 136.

3. Press the Send soft key to immediately initiate the call.

Note:

The IP Deskphone automatically initiates a call shortly after you enter the SIP address or phone number.

Making a call using on-hook dialing

You can make a call by using on-hook dialing. Enter the SIP address or the phone number before going off-hook.

Note:

When you use this method, you cannot toggle between alphabetic or numeric input.

To make a call using on-hook dialing:

1. Dial the number or SIP address.

2. Continue the call by using one of the following methods:

• Press the line feature key.

• Press the Headset fixed key.

• Press the Handsfree fixed key.

3. To terminate the call, choose one of the following:

• Replace the handset into the cradle.

• Press the Goodbye key.

86 Avaya 1120E IP Deskphone with SIP Software on Avaya Aura ® User Guide

Comments? [email protected]

November 2013

Making a call using on-hook dialing

Related topics:

Using handsfree calling

on page 87

Using handsfree calling

While on an active call, you can switch between the handset, headset, and handsfree mode.

To end a handsfree call:

Press the Goodbye key.

To mute a handsfree call:

1. Press the Mute key. The LED indicator lights.

2. Press the Mute key again to return to a two-way handsfree conversation.

To switch from the handsfree to handset mode:

Lift the handset.

To switch from the handset mode to handsfree mode:

1. Press the Handsfree key. The LED indicator lights with a solid red light.

2. Replace the handset.

To use a headset:

1. Connect the headset to the headset jack.

2. Press the Headset key. The LED indicator lights.

3. Press the Goodbye key or press the button on the wireless headset, if equipped, to release a call.

To switch from handsfree to headset:

Press the Headset key. The LED indicator lights.

Avaya 1120E IP Deskphone with SIP Software on Avaya Aura ® User Guide November 2013 87